Don’t see these much anymore

Sort of looks like the old style “hot rod” power antenna install.
 
I looked that up. Was surprised at how many FI engines and parts were listed. I ran across this, I think these were collectors items 20 years ago, now not so much.

​

Hillborn fuel injection manifold​

$650

1739996073362.png
 
I think guys modernize those with new injectors and electronics, but keep the old look.
 
Jacksonville fl.


Seller's description​

1957 corvette ROLLER. No motor or transmission. Will pull engine with nonrefundable deposit or at time of purchase. Dry sump oil system will stay with the car.It's setup for a sbc and a Muncie 4 speed.Has been a race car since 60s so no title or vin.Body is on a full tube chassis, meant to be a road course car. I've taken it to all kinds of shows and gets a bunch of attention I'm just not a corvette guy. 6 piston calipers on front, rear calipers are 4 pistons. On 12in rims all the way around, 305mm slicks in front 295mm slicks in rear. it's fun and fast. Weighs nothing so any motor will fly, had plans to LS swap and make a drag car but bought another chassis.NO TRADES except for maybe a 65-66 mustang or 50s chevy truck. The
 
Its in my neck of the woods -

Asking $10K - Classed a SPO - so a regional only/Track Day Car. Looks good fun - some work required. But I already have "some work to do!"
I can DM the FB link if you're interested.

Cheers - Jim

1741043439123.jpeg
 
Nice. That would be a great start for a track day car. But not for me. I already have enough never ending projects.
 
90k FB MP. New Smyrna Fl


An amazing recreation of the 1957/1958 Lance Reventlow Scarab race car that beat the Ferrari of Phil Hill at Riverside race track in 1958 and was planned to go on to Europe and beat the rest of them Chevrolet 383 stroker, 650 CFM QuickFuel carb, Tremec 6 speed manual gearbox for easy cruising, 9 inch Curry/Ford locker rear end, hydraulic clutch, Cobra reinforced frame, Corvette disks and calipers, Alden adjustable coil over shocks, large electric cooling fans with manual control for Florida summers, aluminum cockpit and doors, hand laid fiberglass body true to the original, only 750 miles on the chassis and drive train, no power brakes and no power steering, just the thrills and excitement of when racing was elemental Personally signed by Chuck Pelley the designer of the voluptuous Scarab body, and the only Scarab recreation to have his signature A true one of a kind masterpiece, which evokes the golden days of American motorsports, at a very fair price
 
Facebook marketplace, $15k, Oviedo fl.


“Down sizing and getting ready to move. I have a new 1967 replica coupe that was purchased last year from Fat Cats in Ga. $13k unassembled. I paid an additional fee to have the firewall and floor bonded in place.I have a 1980 corvette title and tag to do a rebody car. Priced to sell. Located just east of Orlando Florida NO TRADES NEED CASH FOR NEW HOUSE New parts included:1967 coupe bodyDoor glassWindow regulators Wiper bezel grills Door latchesHood not bonded yetFiberglass headliner Fiberglass dashRear filler panel Door hinges ready mount on door pilar post Used parts:C3 Rolling chassis ready to be refreshed Rear glass Rear taillights”
 
This was on marketplace yesterday, and I swear it was originally priced lower. Checked later and seemed price went up. Galian Oh.


1966 corvette built as a autocross car is the mid 70s. Street legal car now with original tags and title. Car has been completely gone through. New 383 stroker small block. Rebuilt Muncie M21 transmission. 456 rear gear. Gauges have been completely redone including the clock. All the heaters and defrost has been installed. 18” wheels with real header side pipes. I have had this car for sometime now and it is absolutely awesome and a blast to drive. Located in Galion Ohio. If you are interested please send me your number and I will call you as soon as I can. Thanks for looking
 
This looks like a good deal if you are in the market for something like this (restomod c1). Anyway trying to help him out a bit. Marketplace Mentor OH for pics.


“selling my 54 corvette, retromod unfinished because of health reasons. It has a chevy 350 with a 350 hp cam and lifters, durashine intake with a 600 cfm elderbrock 4 barrel on top, all new. M-22 4-speed with a 11 " diafram clotch and adjustable throw out brg, all brand new. was a body off resto and frame has a new power rack and pinion front end with air suspention, all 4 power 11 " disc brakes all around, a 2005 mustang 8.8 third member, 3:55 posi with moser axles, all new. I have all the brand new parts,, top, carpet, gauges, tow speed delay wipers, francis wiring, s&w gauges, new speedometer with new odometer set at 0. car is half done and needs finished assembled.new grill, radiator, much more to list. It also has a four corner air ride system, all new. i am invested more then what i'm asking so i have it priced fair to move it. I wish i was physically fit to finish it. It came out of texas with a clean ohio title. I am selling it for $55,000. OBO, with all the parts. please,, serious buyers only, not up to deal with tire kickers. Pics on request. I have never started this car, has all new 2.5" polished stainless exhaust with polished stainless turbo mufflers. Frame is all done in chassis saver gray, nice and clean... “
 
You must log in or register to reply here.

Latest posts

Back
Top