rebuilding a diff here are the parts

[MYBAD79]

I received some feedback, questions about parts to use for a differential rebuild and figured I share all the part numbers here in this forum. I think the attached shows all part numbers for the solid Eaton clutch kit, bearings, seals, ARP ring gear bolts, solid pinion spacer. Cover gasket is Felpro 13314-1 but optional, many just use rtv..... for the posi carrier side shim kit ss12 , good sources are Rockauto and Summitracing.
So if you plan to do a diff rebuild yourself these are the parts.

 

[BBShark]

It's good to know that you can still get brand parts for this.

 

[MYBAD79]

It's good to know that you can still get brand parts for this.

yes, Summit sells the Eaton clutches and they price match ..... Rockauto has the Timken bearings at a good price. The Ratech spacer is too long, for the most part I have to shave a few thou off to make the shims work. The Elite brand spacer from Ron's Machine Shop is better but cost about twice as much so I deal with the Ratech and put it on my lathe.