DRY SUMP PARTS RECOMENDATIONS - Please

[phantomjock]

That view is from the lifter valley down the dizzy hole...

Haven't looked from the drain plug side on the pan - but don't think I need to. When I pushed the endo/bore scope deeper I heard the telltale, "dink, dink, dink" from -- the oil pan! ARGH!

1. Find the part
2. Pull the pan
3. Install the part
4. Reinstall the pan​

There is some "fuzz" between the 4 and 6 o'clock position - will check that out too.

The saving grace ( I think) - this engine has never been fully oiled or run, so at least it not a mess like it could be.

Cheers - Jim

 

[phantomjock]

Every Picture tells a story:


It was already installed. So, now I have a spare for the "spare" engine! Now, not to lose it.

Cheers - Jim