Douglas Mariani
Well-known member
No there the ............."SUPER GUYS" LOL
Hey Red
- Thread starter big2bird
- Start date
Help Support VetteMod Forum:
No there the ............."SUPER GUYS" LOL
MYBAD79
Moderator
Doesn't look like he paid....
That's a good question to ask those who support this.
Depends on who you believe :trumpet:
mrvette
Phantom of the Opera
For sure, and DB wasn't the only one passing out bad info, either....
the electrical stuff is a joke....some other stuff is too, I go there mainly for humor anymore....like the OT and PRC stuffs....
:harhar:
JPhil
Huh?
DAH-dada-DAH ---stand by for A Direct Quote from a Genuine (he says so)Super Hero! Ready? Here goes:
"The man I bought these from is a machine shop owner, and he does the machine work pre-sale. He gets the heads as a bare casting from Procomp. They are an overseas manufacturer...I am not sure from where...maybe Aussie, and then Bryan assembles the heads using quality USA parts and does his own machine work to improve on them."
""An overseas manufacturer.....I am not sure from where..."" (MY F**CKING ASS "not sure where"--we ALL know where 'Procomp' comes from, dude!) ""...maybe Aussie?"" ('Scuse me, but, ---Wayne, I have never heard of any Australian manufacturers of fancy-ass SBC cylinder heads, can you enlighten us? There is however a certain country which is on the Pacific rim, closer to Australia than to USA, which manufactures a lot of stuff--can't quite recall the name of this country at the moment but I'm sure it will come to me....) ""Then XXXXX assembles the heads using QUALITY USA PARTS"" (shipped in bulk from same said un-named country and then repackaged in BOXES made in USA by illegal aliens from yet another un-named country) ""...and does his own machine work to improve them....""
So in other words, they are imported, unfinished cores which need rebuilding by a local machine shop to make them work??? HEY WHERE CAN I SIGN UP TO GET SOME??
:bonkers:
(how much Xanax is 'this guy' taking anyway?)
"The man I bought these from is a machine shop owner, and he does the machine work pre-sale. He gets the heads as a bare casting from Procomp. They are an overseas manufacturer...I am not sure from where...maybe Aussie, and then Bryan assembles the heads using quality USA parts and does his own machine work to improve on them."
""An overseas manufacturer.....I am not sure from where..."" (MY F**CKING ASS "not sure where"--we ALL know where 'Procomp' comes from, dude!) ""...maybe Aussie?"" ('Scuse me, but, ---Wayne, I have never heard of any Australian manufacturers of fancy-ass SBC cylinder heads, can you enlighten us? There is however a certain country which is on the Pacific rim, closer to Australia than to USA, which manufactures a lot of stuff--can't quite recall the name of this country at the moment but I'm sure it will come to me....) ""Then XXXXX assembles the heads using QUALITY USA PARTS"" (shipped in bulk from same said un-named country and then repackaged in BOXES made in USA by illegal aliens from yet another un-named country) ""...and does his own machine work to improve them....""
So in other words, they are imported, unfinished cores which need rebuilding by a local machine shop to make them work??? HEY WHERE CAN I SIGN UP TO GET SOME??
:bonkers:
(how much Xanax is 'this guy' taking anyway?)
JPhil
Huh?
BWAA-HA-HA-HA-HA-HAAAAAA!!!!
Silly little human!!!
This is the forum created by the Evil Villians, whom the Superheros vanquished long ago from the land of goodness & suckers.
It appears that the League of Superheros, operating from their Secret Headquarters deep beneath a small midwestern town, are running into some trouble. The Evil Villians are wringing their hands with glee, but who knows what new twists the Superheros will come up with in the next chapter? :kissass:
We can only wait and see!
redvetracr
Well-known member
sanitized and locked...did you really think they would leave your "little" bump in the road??
Jclgodale3
Well-known member
- Joined
- May 13, 2008
- Messages
- 348
- Reaction score
- 0
Umm...Superhero's don't LIE on public forums ,Cheat and remains to be seen...steal on public forums, do they? I'm crushed to learn this. My Superhero has lost his glamour
BWAA-HA-HA-HA-HA-HAAAAAA!!!!
Silly little human!!!
This is the forum created by the Evil Villians, whom the Superheros vanquished long ago from the land of goodness & suckers.
It appears that the League of Superheros, operating from their Secret Headquarters deep beneath a small midwestern town, are running into some trouble. The Evil Villians are wringing their hands with glee, but who knows what new twists the Superheros will come up with in the next chapter? :kissass:
We can only wait and see!
Jclgodale3
Well-known member
- Joined
- May 13, 2008
- Messages
- 348
- Reaction score
- 0
Wonder what the punishment was for Red and the superhero for not resolving the problem in the 5 days alotted? Apparently not banning since the hero is still on there every day since...but where is Red? Anyone heard from him lately?:tomato:
Twin_Turbo
Der Maulwurf
- Joined
- Mar 5, 2008
- Messages
- 7,575
- Reaction score
- 6
This guy is so full of ****. He also tried to sell them as Dart cast heads which they are not. They are Chinese castings, using the same design mold as the patriot, strike force, american eagle, superflow and all those other no name brands. Look at the flange shapes and all. You can spot these a mile away, they're all the same.
Now, V-Twin once pointed out to the golden boy that they were Chinese. He then said he didn't know that. So now they are aussie heads? They are not. The aussie heads were the pro action/pro topline heads with the kiwi logo and they were pretty damn good. They were bought out by comp under their RHs (racing head service) name. Another company called ProComp Electronics started to market these heads too. They are NOT the same heads, the pro comp is chinese stuff. They are the same design head as these others. All of those heads with the trapezoid shaped center in the manifold flange and the large exhaust face on the head are chinese.
Now, the ******** story about bare castings needing machining. V-Twin back then pointed out the heads were ProComp heads and that they even have the laser engraving on the valve over flange, the COMPLETE
product number denoting which exact heads these are: PC3002-0711-0689
Now, this is PROOF these are not bare castings. There is no machine shop who final machines these (and machining them in the US would push the price tag way beyond what these go for)...so this alleged machine shop gets his crate full of bare castings, then machines them himself and engraves the pro comp number in them?
My BS meter is through the roof again. BTW, these heads can be bought on the bay all day any day for 750 and probably less... BRAND NEW!! NO HASSLES. So dilweed_boy is full of **** yet again.
Now, there's some other stuff going on with those heads in his pic. Anyone took a closer look? Look at where the bolt holes are for the valve cover gaskets. They are not even close to center in the casting boss and on the manifold side they are almost against the side, no flesh left what so ever!!
I found the other thread:
http://forums.corvetteforum.com/c3-parts-for-sale-wanted/2160372-f-s-aluminum-vortec-heads.html
big2bird
Charter Member, Founder Bird-Run, Cruise-In Bird-R
Just another BS lie. I just don't know why this stuff goes sight unseen. It just boggles my mind. COULD be the venders there operate off the same BS truith spinning technology too.
redvetracr
Well-known member
the Chinese don`t care about protein producing (but deadly) melamine in baby formula why would the care about correctly machining aluminum cylinder heads?
redvetracr
Well-known member
I believe they are both in moderation, exactly why they would punish red-69 is beyond me, but it must be KILLING one of them.
I wonder how Dart feels about someone telling people that there heads are the same Chinese castings!
That's one hell of a machine shop, taking the Dart heads and engraving the ProComp PN in them :rofl:
Wow, that is REALLY lame. They can't even cast the valve cover seal area correctly? Who knows what other surprises are cast in!
.
big2bird
Charter Member, Founder Bird-Run, Cruise-In Bird-R
DON'T drop them? May vaporise in shipping?:rofl:
MYBAD79
Moderator
"sha" : pick one:
SHA Secure Hash Algorithm
SHA Strategic Health Authority (UK)
SHA State Highway Administration (Maryland)
SHA Short Handed Assists (hockey)
SHA Seattle Housing Authority
SHA Society for Historical Archaeology
SHA Sweet Home Alabama (movie and Lynyrd Skynyrd song)
SHA Secondary Heads Association (UK)
SHA Sacred Heart Academy (various in US)
SHA Swiss Humanitarian Aid (successor to Swiss Disaster Relief)
SHA School of Hotel Administration
SHA State Highway Account (California)
SHA System Hazard Analysis
SHA Shareholders Agreement
SHA Sample-And-Hold Amplifier
SHA Sidereal Hour Angle
SHA Sociedad Hebraica Argentina (Jewish Community Center, Buenos Aires)
SHA Subsystem Hazard Analysis
SHA Super High Aperture (Sharp Corporation)
SHA Salicylhydroxamic Acid
SHA State Health Agency
SHA American Shad (FAO fish species code)
SHA Safety Hazard Analysis
SHA Sight & Hearing Association (since 1939; Saint Paul, Minnesota)
SHA School of Hospitality Administration
SHA Sanford Housing Authority (Florida, USA)
SHA Summit Housing Authority (Summit County, CO)
SHA Sagamihara Housing Area (Japan)
SHA Hardware Address of the Sender
SHA Sandwich Hybridization Assay
SHA Sioux Honey Association (Sue Bee Honey)
SHA Station Housing Allowance
SHA Switch Homing Arrangement
SHA Shoqëria Anonime (Albania: corporation)
SHA Semester Hours Attempted
SHA Selbsthilfeorientierte Armutsbekämpfung (German: self-help-oriented poverty alleviation)
SHA Superior Hypophyseal Artery
SHA Soft Handoff Approach
SHA Solid Homogeneous Assembly
SHA Scientists Helping America (call for scientists to help in the fight against terrorism)
SHA Speed Headache Associates
SHA Shanghai, China - Shanghai International /Hongqiao/ (Airport Code)
SHA Scsi Host Adapter
SHA System Health Agent
Twin_Turbo
Der Maulwurf
- Joined
- Mar 5, 2008
- Messages
- 7,575
- Reaction score
- 6
suck heave action? 
:ill:
:ill:
BangkokDean
Well-known member
**** Happens Allot
saudivette
Clueless In Sandland
- Joined
- Mar 24, 2008
- Messages
- 2,631
- Reaction score
- 1
- City & State/Province
- Aussie expat in Saudi Arabia
It's been over ten years since I bought any "go-fast" bits in Australia but there certainly was (back then) manufacturers of some decent stuff.
I was a lowly member of the air force and didn't have much cashola so did most of my own mod work, at work - saved a lot of cash but still had some nice bits :thumbs:
mrvette
Phantom of the Opera
oh well......
http://forums.corvetteforum.com/c3-general/2225799-thank-you-durango-boy.html
:crutches:
:flash:
http://forums.corvetteforum.com/c3-general/2225799-thank-you-durango-boy.html
:crutches:
:flash:
Twin_Turbo
Der Maulwurf
- Joined
- Mar 5, 2008
- Messages
- 7,575
- Reaction score
- 6
Posted by Lethalassault:
You read that Red? You had it comming, lethalassault says so. Damn straight, you deserve to be robbed out of 750$ so please stop whining about it. Dboy is holy, you are scum!
You read that Red? You had it comming, lethalassault says so. Damn straight, you deserve to be robbed out of 750$ so please stop whining about it. Dboy is holy, you are scum!
mrvette
Phantom of the Opera
I don't wanna get band over there, but I totally on Red's side, obviously....
some of them just have NO clue, must not be reading the threads, or WHAT??
:tomato:
Twin_Turbo
Der Maulwurf
- Joined
- Mar 5, 2008
- Messages
- 7,575
- Reaction score
- 6
That's why you only see the DB supporters, the non supproters are scared of getting banned when they add their couple of cents...well...apart from Chris & Josh(?)
mrvette
Phantom of the Opera
Twin_Turbo
Der Maulwurf
- Joined
- Mar 5, 2008
- Messages
- 7,575
- Reaction score
- 6
68L71 & ctk30 aka yellow73sb
MYBAD79
Moderator
There was one member asking DB to post his side of the story. Well... here are 40+ pages of both sides of the story:
http://motorgen.com/forum/showthread.php?t=995
http://motorgen.com/forum/showthread.php?t=995
redvetracr
Well-known member
Try posting that link or the TRUTH and see how far it gets you...I`m betting it would get you an all expenses trip to bannville. They don`t care whats true, they don`t care whats accurate, all they care about is post count....I do like the way when Red69 tried posting his complaint they locked the thread, but the lovefest thread posted by the Kool-Aid drinking sheep stays put.....personally I would like to see how many posts/threads they are down since he is in moderation...one might think IB would have paid off his debt for all the posts/thread he generates.
Jclgodale3
Well-known member
- Joined
- May 13, 2008
- Messages
- 348
- Reaction score
- 0
Hell... if the vendors give him "specials" I agree. Why would IB not pay off the debt?
68L71
Well-known member
- Joined
- May 13, 2008
- Messages
- 747
- Reaction score
- 0
I reported that post and said…”these other guys…like red69 who got scammed by db and is in moderation for it.” All it got me was moderation…
MYBAD79
Moderator
Several members over there posted how he helped them with alternator or hydroboost and made it sound like that justifies ripping off another member .... I wonder if the forum owners share this opinion.... is that how it is nowadays ?? BS....
elevatordude
Well-known member
I hear they are serving free koolaid there:drink:
