Electrical people, help needed

[Twin_Turbo]

Anyone know where to get either a connector like this or just the little pinouts? Some idiot removed 2 of them from the super special roof mount radio I have and I need to reconnect them to get this thing working again.

 

[mrvette]

I would tag wires off the board, bring out my own cable to some convenient length, and put a plug on it....done deal....

pardon my attitude, but I ain't got time to deal with every damn concept of a simple connector....hell with them....

:hissyfit::ill::drink:

 

[denpo]

Those pins are fairly common, I'd look for computer cables, discarded electronic of electronic surplus shop.
Here (Montreal) we are lucky enough to have this big surplus warehouse. I go there quiet often, if you can find it in their catalog, I could buy you one.
Or, if you could give me the exactly dimension I could look it up next time I go.
Good luck. I'm having a similar problem, but it's the pin of the headlight switch connector, and I haven't find a replacement to far, they are much more uncommon.
Good luck.

 

[Stpman]

Try here

http://eagleday.stores.yahoo.net/teforcoho.html

Steve

 

[phantomjock]

Digi-key? Heaps of connectors and cheap as chips too. Best of luck!

 

[Twin_Turbo]

Here's some shots of the pin & connector from other angles

 

[BBShark]

I can't read the PN on the shell but I do see it is a JST connector. JST is a manufacturer, I'm sure they are online.

 

[Ralphy]

I have co-worker who is having an engine conversion done in the Tampa, FL area. He is dropping a LS1 into a S10. However the guy actually specializes in wiring harnesses, he builds from scratch. Maybe email him, I hear he's a pretty nice fella.

"Again, this is SOME of what we stock, we can get almost any GM connector for special orders, however, minimum orders may apply."


http://www.currentperformance.com/Connectors/connectors.html

Ralphy

 

[Twin_Turbo]

I bought a jst connector, hope it's the right one. was only 3 bucks

 

[mrvette]

I bought a jst connector, hope it's the right one. was only 3 bucks

PLUS a 50 buck import/shipping FEE......:shocking:

I"m here from the .gov how can I help you???

:trumpet:

 

[Twin_Turbo]

Don't jinx it. :banghead:

 

[MYBAD79]

I too heard good things about these guys:

http://www.digikey.com/

good luck :trumpet: