Jimmyzw22
Member
I said I would post some pictures of what I am doing. This was my fathers 74 Stingray. He planned to rehab it once he retired but was called home before he could retire. The car only had 46k on the odometer and while neglected it is not in bad shape. No rust or damage. It had however, been sitting under a cover for the last twenty years or so. So I am doing everything to this car in honor of Dad. Every nut, bolt and fitting.
I also am doing it all myself from welding the frame, which by the way had some huge cracks at the lower control arm mounts, painting the frame, rebuilding the diff, motor, steering, spindles and everything else. Dad loved horsepower so I am stroking the 350 to a 383 and have AFR 210 heads, A B&M THM400 should do it. I will update as I go.
Jim
I also am doing it all myself from welding the frame, which by the way had some huge cracks at the lower control arm mounts, painting the frame, rebuilding the diff, motor, steering, spindles and everything else. Dad loved horsepower so I am stroking the 350 to a 383 and have AFR 210 heads, A B&M THM400 should do it. I will update as I go.
Jim