Search results for query: *

Before you drop that heavy thing out of there, do a couple more checks. There are 2 solenoids that do the shifting, check them out with the pan off. I had one die in my pickup a year or so ago, $35 for a pair of new ones and I was on the road again.

I am with Tim and Gene, I did it never seeing the inside of one either. It cost more than the 500 Gene spent, my total was around $800. I got a video off ebay and found an ebay guy that sold tranny parts. I ripped it all apart, ordered the parts and took 2 days to put it back together. I built...

I built my tranny from a core, Ebay vendor parts and some from Birds buddy. The cheap cable will work fine. The Shiftworks kit has all the stuff you need for the shifter hookup.

What does a Stud Girdle do for you? Used in conjunction with guide plates? Stand alone?

OK, so here is where I am: Body back on and shimmed, doors on and shimmed to get back gap approx 1/4" top and a little less at the bottom. I have the hood surround sitting on it but not glued down yet. I have the bolt in the nose in loose, no fenders yet. For some reason the gap at the top on...

Looking for a cheaper solution than the 3M 08115 I have been useing, that stuff costs $25 to $40 for a 200ml dual cartrige. I need annother 4 or 5 to get the front clip all back on. I have a Lord Fusor kit (2 cans) but haven't figured out how to apply it yet, I figure its a 1:1 mix, but what to...

Car will be Shiney Black eventually after all the sanding, filling, primer and cussing is done. I want pinstripes and am goinging base coat clear coat. Should the pin stripes be applied between the BC/CC? How long do you have between BC and CC? Last time I did one it was lacqure and clear, had...

Hey Guys; Made a little progress, got the hood surround disasembled and the cracks repaired. Bonding strips ready to stick on, 1 new fender and 1 still to strip, no problems there. I cleaned up ann the bonding pieces that form the planum and fender mount pieces in front of the doors, all that is...

OK, so after all the tap dancing and pissin an moanin is done: What is the best solution for the OP to use? 75 model cast, Toms unit, 10 bolt? Differentials are far from my primary knowlwdge base, so I am asking to learn. I am a long ways thru my frame off on my 81 and will be seriously bumping...

I found a problem today on my car. I have been working ona full body off restomod on my 81 after bouncing it off a palm tree, it toook the left front fender, front bumper and bent the lower control arm shaft. I redid all the suapension, straightned the shaft and have everything all back...

The Transgo Shift Reprogramming Kit does several things: It rerouts some hydrailics, changes pressure on the pump and changes spring pressures on the accumulators. All in the interest of more positive faster shifts. It allows you to hold any gear to any RPM also. The servo upgrade (Super Servo)...

No, the tranny has a pressure switch that holds off lockup until it is in 3rd or 4th

Anyone know anything about this kit? What are the little triangle brackets with the bolt holes for? I am having a hard time picturing this thing, Anyone have pics of installation?

Got busy this weekend. Got the crack in the RR qtr patched, fixed the ground planr for the antenna and mounted the mufflers permanantly/ All that got me to the point of making the Spreader Bar. I think I have looked at every single version there is out there and took ideas from all of them. The...

So I get the Cherry Thread huh? Cool About to start some body work. Whats the best stuff to fix cracks in an SMC body? I am guessing some sort of epoxy with glass fiber, cat hair, whatever pushed into the V-d out crack?