Search results for query: *

CNC-ing the foam will be a mess - too. But you'll have better control over the shaping. BIG ADVANTAGE- both door panels will be correct mirror images. BTW - I'm guessing its a router and not hot-wire? The "HAWK" hanging on the ceiling - ornithopter RC - kite - or? Your pic reminded me - I...

I like it A LOT! Built something similar to pull the engine on the Sports Racer. This setup has a much smaller footprint than the standard engine hoist - but shorter "throw.' May be a worthwhile accessory to build for appropriate circumstances. On the other hand - I'd REALLY like a ceiling...

Sounds like you are looking for Very Thin wheel spacers. Just a different position--between the hat and the hub, vice the hat and the wheel. A bit thicker - but you could try some thin spacers ~ 0.25 maybe 0.125 to test the idea? Might need to trim the overall diameter. OR - What about just...

I did the same for my MIG and air compressor. I did repurpose the drier power socket as we moved the W/D inside. But - the MIG and air compressor have different plug configurations - so I just made two extension cords from some 50 amp shore power cord I pulled from the boat. Each has a plug...

New Element discovered - it's the SCIENCE... https://video.twimg.com/ext_tw_video/1898753843099271168/pu/vid/avc1/720x1280/afIr6nnm7yRDgooE.mp4?tag=12 Cheers - Jim

I built a set of 4 and then went a different route - after install etc. Here's what they looked like fresh out of the mold: I now have a mold sitting idle for anyone interested in similar flares. It could be yours - but shipping ~ ehh. Cheers - Jim

Let me get this. You can drive 70 (on the speedo) in a 65 zone. And if you think the Highway Patrol will let you slide for 10-over, you can show 80-85 on the speedo and keep up with the other traffic! Go any slower - better not be in the Left Lane. {BTW--we're straightening that out in...

Its in my neck of the woods - Asking $10K - Classed a SPO - so a regional only/Track Day Car. Looks good fun - some work required. But I already have "some work to do!" I can DM the FB link if you're interested. Cheers - Jim

Correct tires (size) on the rental? Bluedriver is a pretty popular obd reader. I've been meaning to check out - but have a number already...Tools😵‍💫 Cheers - Jim

YGBSM! that's more than the first estimate! Cash a Check? The its Jail and pay it back- or work it off. Cheers - Jim

JB Weld? There is also a Hi-Temp, but may not need that. Still fill the ports to keep drips out? Cheers - Jim

or, they are about to loose their stash of cash: https://tjvnews.com/2025/02/ny-rep-dan-goldman-linked-to-30m-in-cayman-islands-tax-haven-despite-calls-for-wealth-taxation/ Cheers - Jim

Apparently - not part of the "plan" Cheers - Jim

$250 Listed 4 weeks ago in Lawndale, NC FB: Not the car - Just the Rear Clip - No Hatch. One way to beat the turbulence on rear deck of an earlier model C3! Cheers - Jim

INDOC-TRIN-NATION. You don't need to be able to read - only Repeat.

Or buy 4 sets: Interesting to note: William's tools is a division of Snap-on. And, yes, "Pittsburgh" are made in China. Cheers - Jim