Resources
Categories
Top resources
-
-
-
Data Acquisition by Frank WhitonThis document was written by a GM engineer in 2011. Very good analysis and layout of a data acquisi
- phantomjock
- Updated:
-
Data Acquisition by Frank WhitonThis document was written by a GM engineer in 2011. Very good analysis and layout of a data acquisi
- phantomjock
- Updated:
-
Data Acquisition Decision MatrixThis is a spreadsheet I made to help choose which system to buy. Hope it proves useful to others
- phantomjock
- Updated:
Trending resources
-
Resource icon
-
Resource icon
-
Resource icon
-
Resource icon
-
Resource icon
Most resources
-
43Twin_Turbo
-
18phantomjock
-
17BBShark
Resource statistics
- Categories
- 11
- Resources
- 127
- Downloads
- 597
- Disk usage
- 203.5 MB
C4 Fan in a C3 Spacer Dimensions
2008-08-05
This is a dimensioned drawing of the spacer needed to install a C4 fan in a C3.
C4 Heater Fan Spacer for C3 Scale Drawing
2008-08-05
This is a scale drawing that you should be able to print to scale to use as a template for using a C
L88 style headlamp bucket
2008-05-25
This is a template for an L88 style bucket. No mounting holes, they will need to be drilled as will
75 76 Tach schematic
2008-05-21
Tachometer schematic and board layout for 75-?? Also included is a picture of two board configurati
GM Block Dimensions
2008-05-14
All bolt hole centerline to centerline, crankshaft to deck heights, head bolt hole patterns, bellhou
Modified Jeep Box
2008-05-01
Jeep box modified to bolt on to a C2 or C3 Corvette maintaining steering and pitman shafts in the sa
Cyl head temp gauge
Autometer Ultra-Lite 2-1/16 fuel level gauge
2008-04-29
Fuel level gauge
Autometer Ultra-Lite 2-1/16 fuel press gauge
2008-04-29
Fuel pressure gauge
Water press gauge
Autometer Ultra-Lite 2-1/16 water temp gauge
2008-04-29
Water temp gauge
Jeep Box
2008-04-29
Solid model of Jeep Grand Cherokee steering box. Steering and pitman shaft axis are confirmed as wel