Yellow73SB
Well-known member
- Joined
- Mar 24, 2008
- Messages
- 1,201
Heres the specs of the studs I found
Wheel Stud Style: Press-in
Thread Size: 1/2-20 RH in.
Knurl Diameter: 0.615 in.
Underhead Length (in): 3.000 in.
What bit would I drill the holes out with?
Wheel Stud Style: Press-in
Thread Size: 1/2-20 RH in.
Knurl Diameter: 0.615 in.
Underhead Length (in): 3.000 in.
What bit would I drill the holes out with?