Fuelie74
Well-known member
Does anyone have the dimensions for a trailing arm bushing installation tool?
Tool For Trailing Arm Bushings
- Thread starter Fuelie74
- Start date
big2bird
Charter Member, Founder Bird-Run, Cruise-In Bird-R
I am 100% sure Gary will post an answer.:bump:
stinger12
Well-known member
- Joined
- Mar 28, 2008
- Messages
- 832
- Reaction score
- 0
Plate dimensions: 5'' X 2'' X 1/2''
Bolt Size: 7/16''-20; 3.75'' long
Flaring Tool: air chisel shank
Compress rubber until distance between the two plates is 2.25'' (you can cut two pieces of pipe to fit onto the bolts if you want). Flare the bushing using the air chisel shank and a hydraulic press.
Bolt Size: 7/16''-20; 3.75'' long
Flaring Tool: air chisel shank
Compress rubber until distance between the two plates is 2.25'' (you can cut two pieces of pipe to fit onto the bolts if you want). Flare the bushing using the air chisel shank and a hydraulic press.
Fuelie74
Well-known member
Thanks, that will same me allot of money since I think I have everything I need laying around already.
