DD help on my build?

[1 MN MCN]

Hello,, i need help with my build. If anyone has a good DD program, and is familiar with it's use,, i would like to see what i got!

Here are the parts:

Stock '73 L48 bottom end, dished pistons and all

Edelbrock E-Street heads, 64cc chamb's, 2.02/1.60, 185 runners
Valve Lift .100" .200" .300" .400" .500" .600"
Intake 63 125 182 225 248 249 -
Exhaust 51 99 131 153 163 168
http://www.edelbrock.com/automotive_new/misc/spotlight/e-street.shtml

Full roller rockers

Lunati "256" cam,, card>
http://www.lunatipower.com/Product.aspx?id=1982&gid=287

Edelbrock "2101" Performer intake.

Full length 1 5/8" headers

Stock Quadrajet carb, and Hot HEI.

What am i making??? : )



Headers since installed....

 

[arneoe]

A quick simulation done without confirming all input details. An educated guess: Torque is calculated 10% too high than I would expect from your setup.... Anyway, the calculated trend should be ok.:thumbs:

Arne

 

[1 MN MCN]

Thank you, sir. it's great to know that my calcs weren't too high. At least it's fun to drive, now. :trumpet: