Batt. to Ground Cable

[73c34me]

How long is the ground cable? I need to make a new replacement. thnx

 

[Rod75]

On my '75 the cable goes from batt negitive, thru the batt box over to frame rail. Take a piece of rope or cord and run it thru your path. Tape/cut the ends and measure.

 

[010752]

 

[73c34me]

Much Thanx for the help!

 

[DC3]

I just replaced the one on my '73. It was 28 inches. I found a new 1/0 copper replacement at NAPA. (NAPA #718308). It's a little more stiff than the copper clad aluminum it replaced but it's a good cable.

DC

 

[bobs77vet]

i bet the one from the front frame horn to the engine is worn out also....

 

[73c34me]

Thanks for the help guys. Good point on the front one; I replaced that when I put a motor in a couple years ago.