Search results for query: *

  1. koni4200

    1982 fuel pump relay

    I had a similar problem with an older chevy pickup before. Ended up being the distributor. I put in a proform one that didn't last more than a couple months. Put the stock one back in and it ran fine. Sometimes it would start right up, other times it would just crank and crank. I think it was...
  2. koni4200

    O2 Question

    Thats wierd that it would read zeros and be rich. I don't get it. I guess I might double check the wiring for high resistance on the ground or something causing off readings. Maybe a little corrosion in the splices or connectors whichever is on your setup.
  3. koni4200

    O2 Question

    No no no, the voltages are supposed to read the same whether they are 3 wire or one wire sensors. The only difference is that the 3 wire has power going to it. The computer would be all messed up if the sensor actually read differently. What I was saying is that my sensor read full rich as well...
  4. koni4200

    O2 Question

    I had the same problem, installed a heated o2 sensor and it crapped out real quick, in about a week. Installed the stock sensor and it worked fine. wbo2 with the ebl flash set up is what I did from there, lots of tuning and learning. Let me know if you're looking at tuning soon, I'll be selling...
  5. koni4200

    Manual master cylinder

    I do like how clean it looks, and I think the brakes would be sufficient for a Vette, my friends 68 Galaxie has four wheel drum and manual brakes and that was tough to stop in a hurry. Being heavier and having worn out components I'm sure were the causes. I always thought that disc brakes...
  6. koni4200

    82 parts for sale

    TPS-TEC Throttle performance switch P/N 102016 - $40 Hypertech Power Chip P/N 152802 with 160 stat- $50 01225550 reman module from my 82-$30 The TPS switch and Power chip were lightly used and the 160 stat is new. The ecm was in my car when I got it and worked fine and the stock chip is...
  7. koni4200

    Nice aftermarket EFI section in Nov. HOT ROD magazine

    I agree with all posts on this one, it is a nice write up and they are way over priced. I still can't justify 2k to ??k on a new injections set up. The mass-flow setup seems interesting since you don't have to tune it. But at 3k, I could buy a new crate motor with a carb.
  8. koni4200

    Another new guy!

    Hey everyone! I've finally got to this site and got registered. I can't believe what I've been missing. A little about myself, well car first. 82 with the crossfire on top still. Has a 2040 cam, xram, 2" tbi's, dart iron eagle heads, ebl flash computer, no a/c or emissions whatsoever, true duals...
Back
Top