I have uploaded several CAD files of a Baldwin-like mod for the C-3 rear deck. They are ZIP files and located on my 1Drive. These are too large to load here. The jpg is a "placeholder."
The models have been"smoothed" for CFM work. As a result; there are NO Bumpers. NO Mirrors, the front openings are CLOSED, the windshield and side windows are smoothed, NO Headlight buckets, and the chassis is a one piece and dropped about 2 inches. The Wheel Wells are smoothed and there are NO Suspension components.
I work primarily in RHINO, and these are exported files:
1. RHINO (native) 3dm
2. RHINO compatible igs
3. RHINO exported STL (Binary)
4. RHINO exported STL (ACSI)
NOTE the STL files noted the "difference" in the solid and stl file would be 0.254 mm.
If you plan to CFM these models, I ask you share your results. If you "Slice" them and build a 3D print, I'd like a copy of the slice files, or the product. If you would like to download these send me an email and I will provide the "Shared" Link.
CHEERS - Jim
The models have been"smoothed" for CFM work. As a result; there are NO Bumpers. NO Mirrors, the front openings are CLOSED, the windshield and side windows are smoothed, NO Headlight buckets, and the chassis is a one piece and dropped about 2 inches. The Wheel Wells are smoothed and there are NO Suspension components.
I work primarily in RHINO, and these are exported files:
1. RHINO (native) 3dm
2. RHINO compatible igs
3. RHINO exported STL (Binary)
4. RHINO exported STL (ACSI)
NOTE the STL files noted the "difference" in the solid and stl file would be 0.254 mm.
If you plan to CFM these models, I ask you share your results. If you "Slice" them and build a 3D print, I'd like a copy of the slice files, or the product. If you would like to download these send me an email and I will provide the "Shared" Link.
CHEERS - Jim
