Resources
Categories
Top resources
-
-
Data Acquisition by Frank WhitonThis document was written by a GM engineer in 2011. Very good analysis and layout of a data acquisi
- phantomjock
- Updated:
-
Data Acquisition by Frank WhitonThis document was written by a GM engineer in 2011. Very good analysis and layout of a data acquisi
- phantomjock
- Updated:
-
Data Acquisition Decision MatrixThis is a spreadsheet I made to help choose which system to buy. Hope it proves useful to others
- phantomjock
- Updated:
-
Optimal Design and Fabrication of Exhaust Muffler.Optimal Design and Fabrication of Exhaust Muffler
- BBShark
- Updated:
Most resources
-
43Twin_Turbo
-
17phantomjock
-
17BBShark
Stewart Warner 6 of 6
2010-04-15
These are the assembly instructions for Stewart Warner type 777F Series Drive Joints (Speedometer Ad
Mako Shark.dwg
2010-09-05
DWG file of the Mako Shark emblem from the Malo Shark II concept car.
[img]http://www.vettemod.com/
C3-Offset Trailing Arm.igs
2010-11-08
This is a CAD file of a VBP offset arm with a shell for a Johnny Joint. igs format
[img]http://w
Stroker 6 link with missing parts
2011-09-01
This is a dxf file of all parts needed for the Stroker 6 link suspension. 6mm plates and 8mm plat
C3 Offset Arm.dxf
2011-11-28
Download is for a VBP offset trailing arm with a johnny joint shell for the front pivot. dxf format
C5 Upper Control Arm Rear
2012-06-13
This is the rear upper control arm for a C5
[img]http://www.vettemod.com/forum/imagehosting/448e1
Corvette C5 Rear Spindle and Hubs
2012-06-28
Step Model corvette c5 rear and hubs & rotors
Rear Wing Discussion.pdf
2012-10-31
This is an an Appendix from Simon MacBeath's book, [U]Competition Car Aerodynamics: A Practical Hand
Corvette Handling - A Performance Workbook
2012-11-12
This is a much smaller version than the one I uploaded a few years ago.
From The Ground Up - Building A Competition Corvet
VIP - Vette Improvement Program
2012-11-14
VIP - Vette Improvement Program
85-87 C4 to C5 caliper bracket
2013-01-04
Adapter bracket for C5 calipers on 85-87 C4 spindle.
The 1963 Corvette Sting Ray
2013-01-16
SAE paper presented January, 1963
R&P Reverse Engineering Opp
2013-05-27
Here is a set of R&P jpgs - you can use to Reverse Engineer, Strengthen, modify as required for a Po
Delphi 600 Steering Gear Manual.pdf
2013-06-10
Delphi 600 Steering Gear Manual.pdf
Headlight Bracket.pdf
2013-10-06
This is a pdf template for headlight brackets for the 93-97 Ford Probe headlight motors. This templ
1Body Mount repair
2014-02-08
Method for replacing body mounts without removing body.