Recent content by Doug

Thanks mate, appreciate the help. Doug

Be very interested to know the reservoir part number if you have it. Doug

Need some ideas. I checked the runout on the front hubs before I fitted the new rotors and found they had about .014 runout on each side. (on new wheel bearings) Removed the hubs and took them to be machined. The guy doing the work removes the bearing case and centres the hub on the machined...

Any of you guys know the difference between a 72 and 77 radiator, or more to the point, can I put the 77 into a 72? the 72 is a S/B with A/C. I don't have the 77 radiator here to compare the differences. Thanks, Doug

Could either of you guys tell me what size (length) mounting bolts did wilwood suply for the front callipers? Thanks, Doug

I have a 72 s/b with power steer,I need to know what the clearance between the p/s pulley and the crossmember should be. The crossmember has marks on it from previous contact with the pulley. I installed new eng mounts and bought a billet pulley for the pump but it was actually a slightly larger...

Probably a bit late to chime in with this, but I got mine from TCE. Their price was cheaper than anyone else and the service was first rate. Tod is the guy I dealt with. It was also quite a bit cheaper to ship the parts in 2 boxes rather than 1 large one, (I got a m/cyl as well)...

Did my apprenticeship at a transport company and they beat it into us that you always use antiseize on the wheel studs. Spent 16 years working on forklifts and Bobcats as well and we always used it on them to. Never had any issues with it causing problems. I think the main thing is to make sure...

Hey guys, Found this place the other day while looking for info on rear 6 link setups. A lot of great tech info on here, and obviously a lot of members willing to share their knowledge and experience with the rest of us dummies. I will warn you all now, I will ask more than my share of dumb...