BRUTAL64
Neanderthal
Since I have not used roller cams to the extent that I have flat tappet cams I was hoping that you people- with roller cams -could share some information.
What would help here is:
Brand name-part number and roller type
specs of cam-duration at .050
Lift- rocker ratio
LSA and (if possible) intake center line
Also, type and size of engine.
Compression
Induction system.
Finally;
Any comments of what you think of cam and what you would have done different if you are not totally happy with current cam.
This is not about about pure MPG, it's about Horsepower and torque. In my search for the PERFECT cam for a 496 I've been getting a lot of crap info from the cam compaines. Wheather it is a SB or BB roller cam, with your info I'll be able to sort this shit once and for all.:drink:
This will help us all in the future and with MPG figures I compiled on an earlier thread, this could be VERY useful.
Thanks for any information you supply.:beer:
What would help here is:
Brand name-part number and roller type
specs of cam-duration at .050
Lift- rocker ratio
LSA and (if possible) intake center line
Also, type and size of engine.
Compression
Induction system.
Finally;
Any comments of what you think of cam and what you would have done different if you are not totally happy with current cam.
This is not about about pure MPG, it's about Horsepower and torque. In my search for the PERFECT cam for a 496 I've been getting a lot of crap info from the cam compaines. Wheather it is a SB or BB roller cam, with your info I'll be able to sort this shit once and for all.:drink:
This will help us all in the future and with MPG figures I compiled on an earlier thread, this could be VERY useful.
Thanks for any information you supply.:beer:
Last edited: