mrvette
Phantom of the Opera
From other threads some may know I have a older/antiquated speed density EFI on my 355 roller engine, it uses the late 80's tech #1227730 GM computer, call the engine a basic TPI because that's what the electronics is...stock as a stove, except the CalPak/chip in there, that was burnt some years ago....I have a heated plain jane O2 sensor in the collector, just ONE of them....
so the gear to burn chips is still high, plus I tried ditching this system years ago, and it was a NO GO, the programming and 9 pin D connector into any laptop I could find, shot me down BIG TYME....
what is out there NOW, from GM/junkyards that can run this engine, maybe learn a new program so I don't have to mess with it so much, and maybe still run with the HEI??
or have all the designs just left this in the dust and fuggetaboutit.....:hissyfit:
I gotta keep this cheep, spending thousands is totally out, spending a couple hundred is maybe do-able.....
:nuts::gurney:
so the gear to burn chips is still high, plus I tried ditching this system years ago, and it was a NO GO, the programming and 9 pin D connector into any laptop I could find, shot me down BIG TYME....
what is out there NOW, from GM/junkyards that can run this engine, maybe learn a new program so I don't have to mess with it so much, and maybe still run with the HEI??
or have all the designs just left this in the dust and fuggetaboutit.....:hissyfit:
I gotta keep this cheep, spending thousands is totally out, spending a couple hundred is maybe do-able.....
:nuts::gurney: