Misc Vintage Racing Clips

Guy is kinda entertaining. I wonder how he is doing on his funding drive.

Somebody gave him a bunch of parts, it is in one video. Always looks like he was out partying the night before.


This is kind of neat, from Australia.

[ame]https://www.youtube.com/watch?v=proAhdDRS48[/ame]
 
More backstory

[ame]https://www.youtube.com/watch?v=YjfxSPmRK1I[/ame]

Who knows, the way the internet is today and things going viral, this young man could end up with his own show. :)
 
Last edited:
[ame]https://www.youtube.com/watch?v=i4Tg0sGvhak[/ame]
 
[ame]https://www.youtube.com/watch?v=yMDzBMRX7T0[/ame]
 
[ame]https://www.youtube.com/watch?v=iKyh5RTPgoA[/ame]
 
This seems to be a customer wandering around RCR’s shop.


[ame]https://www.youtube.com/watch?v=DPbEriBgJ9s[/ame]
 
More backstory

https://www.youtube.com/watch?v=YjfxSPmRK1I

Who knows, the way the internet is today and things going viral, this young man could end up with his own show. :)

but what he won`t have is a Greenwood Corvette...nothing about it is Greenwood

Well, he’s a young guy, just trying to get monetized on YouTube:) so I won’t get too critical. I think the guy selling it “promoted” it up a bit.

He works for a Corvette shop, so it might eventually be complete.
 
[ame]https://www.youtube.com/watch?v=EC5KYwxvqjs[/ame]
 
More backstory

https://www.youtube.com/watch?v=YjfxSPmRK1I

Who knows, the way the internet is today and things going viral, this young man could end up with his own show. :)

but what he won`t have is a Greenwood Corvette...nothing about it is Greenwood

Well, he’s a young guy, just trying to get monetized on YouTube:) so I won’t get too critical. I think the guy selling it “promoted” it up a bit.

He works for a Corvette shop, so it might eventually be complete.


with that wide body, Wilwoods and a 5-link that car will not be racing with all the production/frame based Corvettes, Camaros, Mustangs, etc. it will be racing with current era Trans-Am cars in the wings and slicks class where he will be running so far behind the pack it will be sad....rebody it as a 69 OK, but as he is doing it is a waste of time..I`ll add nothing super trick about polished rear spindles (everyone does it) and his rare 5-link is an early RPF (Bill Riley) as sold by Guldstrand...$500 worth of used up junk for $5000, that casey putch is quite the flim flam salesman.
 
with that wide body, Wilwoods and a 5-link that car will not be racing with all the production/frame based Corvettes, Camaros, Mustangs, etc. it will be racing with current era Trans-Am cars in the wings and slicks class where he will be running so far behind the pack it will be sad....rebody it as a 69 OK, but as he is doing it is a waste of time..I`ll add nothing super trick about polished rear spindles (everyone does it) and his rare 5-link is an early RPF (Bill Riley) as sold by Guldstrand...$500 worth of used up junk for $5000, that casey putch is quite the flim flam salesman.

LOL :). I only linked a couple as I knew it would be controversial!

Interesting points that you made.

I cut cable 8 years ago, so Netflix and YouTube are my “TV.” When there is something corvette related (or car related) that is a bit interesting, I drop it here.

This is the last forum I post on anymore.
 
[ame]https://www.youtube.com/watch?v=5CTvtmoZsVA[/ame]

I had an article on how to bulge c2 fenders like that, but could not find it the last time I looked.
 
[ame]https://www.youtube.com/watch?v=bcmQBQyzg48[/ame]

[ame]https://www.youtube.com/watch?v=OgW3spT-Kls[/ame]
 
[ame]https://www.youtube.com/watch?v=PBDBDpxOuFk[/ame]
 
[ame]https://www.youtube.com/watch?v=jUJymuiQmYY&t=211s[/ame]
 
[ame]https://www.youtube.com/watch?v=oq1S8UNYftQ[/ame]
 
[ame]https://www.youtube.com/watch?v=WvBebozQyqM[/ame]

[ame]https://www.youtube.com/watch?v=8gb8lYOjATE[/ame]
 
At 8 minutes the c2 almost takes out.

[ame]https://www.youtube.com/watch?v=wxwZ9eIntpM[/ame]
 
[ame]https://www.youtube.com/watch?v=-QT1GAFdoHk[/ame]
 

Latest posts

Back
Top