door lock switch not responding

rzkas

Well-known member
Joined
Mar 15, 2010
Messages
61
Location
washington
hi? i have a 82 corvette with power door locks. my power windows roll up and down but the door lock switch to lock door is not working.

what is the fuse that control door lock switch. how can i fix this problem?

if there is specific fuse for power door lock, post pic of fuse pls

thanks
 
More likely the switch than the fuse, is the other side working? I so, the fuse is fine. Wanna bet the connector corroded? it's some cheap pos piece o plastic and cardboard pressed together. the switches also internally fail often.
 
left and right switches are not responding. When i press or push either switch nothing happen. Switch moves up and down but nothing click or moves inside the door
 
Been there, done that. As TT stated, its usually the switch or the connector or both. Pull a door panel and look. Check for voltage with a test lamp. Look for green corrosion in the connector area. The "help" section sells cheap switches. Try one.
 
Top