cs130 wiring

steve228

Member
Joined
May 9, 2008
Messages
11
Location
Pearlington,MS
Hello. I have a cs130 in a 68 vert. I have the EC82 plug with resistor.
It has two wires.yellow with resistor and red.
These are the S and L wires. Can anyone tell me how they attach to the
Si side.
On my old voltage reg plug...I have
F234.
F=blue wire 2= white wire (these are the old si plug).
3= red wire that has fusible link leading to two
Reds.one going to Old alt the other to horn relay.
4=brwn wire with white stripe.
Where do I attach the S and L wire from cs plug?
 
On that CS130 S stands for sense, and goes to the red wires, after the fuse link, same as that horn relay.....


L stands for light, as in idiot light, or maybe a resistor wire that subs for the idiot light in some sharks.....I put in an idiot light when redoing my instruments....the light is switched hot so dead when key is off, other side of bulb goes to L on the alt.....it is also part of the regulator circuit for proper function...if alt fails to put out, that L wire is grounded, to light the bulb....

:smash::surrender:
 
Top