Dirtbuster1
Well-known member
I got my adjustable strut rods in today with no instructions. They were shipped from Corvette America. They came with bolts and washers, but CA stated they were used for shipping only.
So my question is do I continue use my camber bolts from the stock struts. If so there is not enough space to install the cap washer used on the adjustment side. The new ones come with metal caps on both sides. Also does it matter where you set the camber bolt since the struts are adjustable?
Next question is it appears that the lower mounting at the shock bolt doesn't have space for the metal caps installed on the new struts. The original struts did't use it, so I'm assuming that the new ones don't need them either.
2 to 3 hours installing these new struts wasn't fun. I just want to make sure they are installed correctly.
So my question is do I continue use my camber bolts from the stock struts. If so there is not enough space to install the cap washer used on the adjustment side. The new ones come with metal caps on both sides. Also does it matter where you set the camber bolt since the struts are adjustable?
Next question is it appears that the lower mounting at the shock bolt doesn't have space for the metal caps installed on the new struts. The original struts did't use it, so I'm assuming that the new ones don't need them either.
2 to 3 hours installing these new struts wasn't fun. I just want to make sure they are installed correctly.