Upper Radiator Hose on a LT1

Does anyone have some pictures of the upper radiator hose setup on a LT1? I am specifically interested in the hose to thermostat housing/intake area.

LT-1 or LT1?

If you mean the EFI motor, it's on the water pump:

THE largest reason I went with a LT induction was simplicity, a one time modification fight with the manifold to do things right with the HEI in normal install, and the water fittings in a more normal flow pattern....and like the other day, it's SO much easier to work with...that TPI has been a PIA for some 13 years....tired of it....tired of the dated look too...

:tomato:

Twin_Turbo said:

LT-1 or LT1?

If you mean the EFI motor, it's on the water pump:

Click to expand...

I'm looking for a thermostat housing with the tube connection coming straight out the front. I can't use the swivel type because I don't have enough room (height).

Something like this?
http://cgi.ebay.com/ebaymotors/NOS-...c0.m245&_trkparms=72:1171|65:12|39:1|240:1318

dunno what it's from, measurements are in the description.