Roller rocker arms

[MYBAD79]

Looking at these two roller rockers.... I have guide plates and Edelbrock RPM heads... ?? Self aligning or not ??

Part numbers are: CCA-1318-16 and CCA-1302-16


These are the rockers I have now, 1.52 ratio roller tip:
http://store.summitracing.com/partdetail.asp?part=CCA-1412-16&autoview=sku

doesn't say if these are self aligning or not....

 

[tracdogg2]

Karsten,
The first link doesn't work.
Mike

 

[Twin_Turbo]

Don't use guide plates AND self aligning rockers, it's one or the other.

 

[MYBAD79]

looks like the link to the "compare items" page does not work... dunno.... I listed the part numbers instead.

 

[MYBAD79]

ok, these are the ones that are not self aligning:
http://store.summitracing.com/partdetail.asp?part=CCA-1302-16&autoview=sku

Will I need different length pushrods when changing the rocker from roller tip to full roller ? Looks like I might have to add $100 for a set of pushrods

 

[Twin_Turbo]

ok, these are the ones that are not self aligning:
http://store.summitracing.com/partdetail.asp?part=CCA-1302-16&autoview=sku

Will I need different length pushrods when changing the rocker from roller tip to full roller ? Looks like I might have to add $100 for a set of pushrods

No, but it's always a good idea to check rocker geometry, check how the tip wipes the valve stem.