FS: Wilwood forged Superlite Calipers (new)

[69427]

Got a pair of Wilwood Superlite calipers (4 x 1.75 inch pistons) for 1.25 inch rotors. Never used. Bought them for my C4 suspension conversion on my '69, but I had to change plans and go with shallow hat rotors to clear the suspension, and the calipers are made for deeper C3 type rotors. I also have a set of Wilwood Poly D pads that go with it. Paid $350 for everything. Sell for $250 plus shipping.

thanks,
Mike

 

[MYBAD79]

Are any modifications required to fit these on a otherwise stock C3 ?

 

[Yellow73SB]

Are any modifications required to fit these on a otherwise stock C3 ?

Just the brackets from corvette engineering

 

[Twin_Turbo]

Which are easily home made from some (I think it was) 6mm steel plate.

 

[Yellow73SB]

They look pretty easy

 

[Twin_Turbo]

If you need a dimensioned drawing, let me know. It's a simple 3.50 GT lug mount. I have a drawing for that.

 

[Twin_Turbo]

 

[Twin_Turbo]

It's in mm, need inches? I've got that too. Something's funky w/ the auto dimensioning of the bolt holes. They are R.225 D.45 on the caliper and .5" on the steering arm (lower hole for spindle)

 

[Yellow73SB]

Could you upload the file into the downloads section?

Could I open it in autocad

I'll just print it out at 1"-1" scale and won't even have to measure anything

 

[Twin_Turbo]

I will, hold on.

EDIT, it's uploaded now. Below is the same drawing in inches for those without CAD

 

[Twin_Turbo]

 

[Twin_Turbo]

OH BTW, these pics (full size view) are TRUE TO SCALE!!!!!!!!!!! print & you have your template.

 

[Yellow73SB]

Why does corvette engineering say that you need 16" wheels or larger?

 

[69427]

Sold. Thanks for the interest and discussion.

 

[MYBAD79]

Could somebody copy this very useful information to the tech or fabrication section ??

Very nice template :thumbs:

 

[Twin_Turbo]

The Acad file is available in the downloads section. The image is in there too with the Acad file.

 

[Twin_Turbo]

Why does corvette engineering say that you need 16" wheels or larger?

Must be because of caliper size although I find that a little hard to believe.

The integras I have fit behind a 15" basset type wheel. It's not the diameter that poses the problem, it's the width. I have 16" wheels and still needed a spacer.

 

[84rzv500r]

I have losta room and could go bigger brakes....

by changing the bracket and the rotor....

[/IMG]

[/IMG]

:thumbs: