Search results for query: *

I'm adding two fuel tank fittings to the bottom of my tank to help out the pump and was going to add a baffle to the interior of the tank. Going to bend up a thin piece of metal and sandwich it between the fitting nut and the tank to hold it in place. Should I add some fuel tank foam within...

Anyone else having issues with Holley regulators? I've had two doing the same thing, they chatter and will not maintain pressure, they chatter so bad it will shake the needle off the gauge. I replaced the Holley with an Areomotive 13201 and it is solid as a rock. I was using the Holley big...

What holds the steering shaft in and tight? Mine was tight but is now a little lose, Neal

I've read through the threads about the 6-link kits and the benefits of the set up. I do mostly street driving but do want to run on the track some day (1/4 mile) so this looked to be a good option for the cost. I usually do the DIY upgrades on my car but for the price and a solid place to...

Whats the best way to mount the engine oil cooler? Is it best to mount so that the oil will drain back to the engine or to mount it so that the oil stays in the cooler? I guess there are concerns for each way. If its mounted so that the oil drains back to the engine than there is the concern...

I'm on my 3rd Holley regulator over the last 2 years and its starting to piss me off. Is anyone using these regulators with luck? I'm using the large port Holley regulators and they will start chattering and than will loose control of the fuel pressure. They will work off and on once they...

I learned an important lesson while working on my car and the steering system. I installed a hydro boost on my car a while back and have been experiencing issues with it. When I would hit the brakes and turn the steering would lock up for a spit second. This has always bothered me and I have...

This is hilarious, and to think this all got started by my inability to decide if I knew what tire was the right rear. Neal :)

Thanks Rod75 I had it monuted on the pass side than I got to questioning myself Neal :)

I know this is simple but I keep second guessing myself Is it the pass side or the driver side? Do you stand at the front of the car or the back? Neal :)

Back when I was having heating issues with my car Matt G. had suggested that I could measure air flow changes through the radiator by measuring voltage from the fan motor while not energized. Back then I was so caught up with fixing my heating issue that I let this one fall to the back of the...

I have a non-dampened fuel pressure gauge mounted where I can watch it while driving, the readings are very erratic. I've had to change the fuel pressure regulator due to it fluctuating while the car is sitting there idling. This is the second Holley large port regulator that I have used and...

Thinking of installing cats to reduce exhaust smell, wife don't care for the smell. I'm running a large solid roller cam and I have side pipes so the exhaust is right at the windows. Just wondering if anyone here has tried this and how did it work for you. Neal

I've done the alignment on my car the last couple times its needed it. I changed the ride height on the rear and its been raining with rain forecasted for the next few days so I decided to set it up and check all aspects of alignment on my car. Took my time and located the frame center-line...

I like auto's Neal

Will do, would rather not have full manual, still gona drive the car on the street most of the time. Neal

I found a site that allows me to search for the 200 and it will show multiple vehicles that also have this trany. Anything with a chebby pattern V8.....but I understand the GN's had something slightly different than others, that made it more durable...unsure what though, maybe just BS by time...

first gear in the 700 is way to low for my 4:10 rear and it cost over $1000 to change it to somehting that will work. Neal

I loked that site over a few days ago been thinking about ordering the 2004r manual from them Neal

The Grand National guys have found all the week links and figured out how to make them last. I've found a couple builders that guarantee them to 750HP, that ought to be good enough for me. add a good 3200 stall and I'm in business Trying to figure out what vehicels to look for at the...