Search results for query: *

I would really change the oil in th tko gearbox after 50 miles. I changed my oil after 2 (!) miles and I was chocked by the amount of particles that came out with the oil... Just not small particles but actually large metal chips from the milling of the aluminum housing ! I then changed oil 2...

Hi again! The summer is over here in Sweden and the temperatures are dropping... It´s been a great summer, the weather has been fantastic and I have really enjoyed my Corvette:drink: Since the Vette is almost done (seats will be fixed this winter together with a cardan shaft balancing and a fix...

Yes that is correct, if I buy from Europe. Buying from the States adds the figures I posted however. Great that you was able to get hold of the stuff you needed!

When importing stuff to Sweden I first have to pay a custom fee of 3-7% on the total sum including freight, then on top of all that, I have to pay another 25%!!!!!!!! government tax...

At last, one thing that is cheaper in Europe than in the States:thumbs:

I used the machined surface at the back as well. What about the machined area for the spring, is that parallel?

Here's a short video from a summer nights cruising in my home town Hudiksvall, Sweden. Lot's of nice cars in this cruise, around 1500! It is a small town, only 15000 people live here. http://m.youtube.com/watch?v=-bp4RJ3dYLE

I have had my eyes open for a machine that have been tickling my mind ever since I first started working on mechanical stuff. So far I have been lucky enough to get hold of a lathe, a large drilling machine and a few machines for working on sheet metal but this specific piece of machinery has...

The 427 is running nice and strong, up until 5500rpm where it starts to misfire. Or maybe not misfire, it is more like it is running out of breath. The Rochester carbuerator is functioning absolutely flawless below 5500rpm without any hesitation or tendencies to bog. It is totally renovated to...

Ok, have put around 500 miles on my 69 now and I have noticed that I get alot of road dust all over the engine bay:shocking: Since I'm using twin Spals the original fan shroud is not used. This means that there is a big gap between the lower part of the radiator and front crossmember. This gap...

Facts: Original TI distributor. Prev. owner added ignitor system. Do not know why. Dist in very good shape. I set base timing at 13º. At 2800-3000 i have around 36º. Vacuum shows additional 16º. Basically a sound setting for my engine, perhaps some more initial but it is ok for now. The...

Update: checked the function with the mc moved away a bit. Same result. Checked the pedal free play in relation to booster and it was a clear play there. Took it out for a new test drive and to my surprise the phenomena got less and less with each break! When I got back home it was basically ok...

Thank's!! I will loosen the mc a bit and make a new test. I hope I will not have to get a new booster... A nightmare to remove and the cost for a new unit will be around 460$ here in Sweden. I will get back with an update on the test. Again, thank's!

Hmmm, now I get a bit uncertain... I used the pin delivered with the booster and I checked that it did not push on the mc piston before the pedal is depressed. Can you explain what the compensation hole is? The MC and the booster is correct for my car.

I could not find such a spring on my pedal set up. There is a spring acting on the brake pedal but that is positioned right on the brake and clutch pedal bearing shaft. I tried to pull the pedal back up manually but the pedal pretty much ignored my efforts and continued in it´s own phase...

Hi, Got my 427 -69 back on the wheels yesterday and drove my first 100 feet on the road. Had to stop and go back, it was too much dust on the road after the winter, and then I noticed that my brake pedal was a bit slow to return after beeing depressed. I could feel the hesitation of the brakes...

Hi, If possible, try to have the flywheel and clutch balanced before assembly. They are probably way off in this aspect. I bought an SFI approved flywheel for my 427 from a well known manufacturer and it had balance holes in it. The instruction said to have it checked anyway so I did. It was...

Hi, Need some help to identify what the hose (with the red arrow) on the photo is used for??? I did not take any notes during tear down, of this exact hose so, what can it be. Have no idea where it was routed on the inside... Have not found it in the AIM so far. The car is a 69 427. /Daniel

I need some help with the position of the wiper door vacuum relay on my early build 69. I suspect the previous owner did not put it in the right place. I don´t need NCRS standards but, I would expect that the engineers at GM back in 68/69 put at least some thought where to place it most...

Thanks GTR1999, I will remember to do so!