Resources by BBShark
Optimal Design and Fabrication of Exhaust Muffler
C5 Suspension Dimensions
2020-12-20
C5 suspension Dimensions and more from Source: Performance Trends Suspsnsion Analyzer v1.1
Laser Plates Rear.iges
2019-12-05
Rear Suspension
[img]http://www.vettemod.com/forum/imagehosting/45de9065e1b3f4.jpg[/img]
Lasercut R&P Plates
2017-04-19
These are laser cut plate patterns for a R&P mount without the center link.
C5 Upper Control Arm Rear
2012-06-13
This is the rear upper control arm for a C5
[img]http://www.vettemod.com/forum/imagehosting/448e1
C3 Offset Arm.dxf
2011-11-28
Download is for a VBP offset trailing arm with a johnny joint shell for the front pivot. dxf format
Stroker 6 link with missing parts
2011-09-01
This is a dxf file of all parts needed for the Stroker 6 link suspension. 6mm plates and 8mm plat
C3-Offset Trailing Arm.igs
2010-11-08
This is a CAD file of a VBP offset arm with a shell for a Johnny Joint. igs format
[img]http://w
ultra-link-new-6mm-B1
2009-11-16
dwg copy of ultra-link-new-6mm-B from 6-link download
ultra-link-new-6mm-B1
2009-11-16
dxf copy of ultra-link-new-6mm-B from 6 link download
C4 Brake Caliper Pictorial
2009-04-04
This is a pictorial of all the brake calipers that were used on the C4
Jeep Steering Adapter Plates (for laser cut)
2008-08-11
This is a .dxf drawing of the adapter plates for use if you want to laser cut them. This is the inf
Jeep Steering Adapter Plates
2008-08-11
This is a .pdf drawing of the adapter plates for use if you don't want to laser cut them. The thr
C4 Fan in a C3 Spacer Dimensions
2008-08-05
This is a dimensioned drawing of the spacer needed to install a C4 fan in a C3.
C4 Heater Fan Spacer for C3 Scale Drawing
2008-08-05
This is a scale drawing that you should be able to print to scale to use as a template for using a C