Recent content by vetteoz

  1. V

    Modern computers....

    http://www.eficonnection.com/24x/default.htm
  2. V

    C4 vs C3 differential side yoke wear differences?

    I believe the C5 /C6 rear has the SLA double wishbone setup you describe where the halfshaft is not a load bearing member;
  3. V

    C4 vs C3 differential side yoke wear differences?

    There is no top strut from the diff center to the upright on a C4 ; only the bottom camber arm and halfshaft. C4 D36 shown but same setup The C4 rear is identical to the Jag pictured
  4. V

    C4 vs C3 differential side yoke wear differences?

    The trailing arms are SLA , being rubber bushed they allow the upright / spindle to flex and change camber unless otherwise controlled. If you have the suspension assembled without a halfshaft there is a lot of freeplay just pushing suspension by hand. Across the car there is only the camber...
  5. V

    C4 vs C3 differential side yoke wear differences?

    Sorry, not in D44 -HD http://forums.corvetteforum.com/1570568920-post12.html http://forums.corvetteforum.com/1570614638-post16.html Clips available in various thicknesses from Tom's Diffs Bottom of page http://www.tomsdifferentials.com/catalog.asp?pg=32
  6. V

    C4 vs C3 differential side yoke wear differences?

    Double post:confused:
  7. V

    C4 vs C3 differential side yoke wear differences?

    The side yokes are fixed in the carrier and do not float.The yoke end play is set by changing the thickness of the C clips used to retain yokes into the side gears.
See more
Back
Top