Recent content by turbinesurgeon

Been putting alot of thought into an AWD conversion lately. Looking at purchasing a Vette under $2,500 to do it to, even a C4 would be a good donor to start with considering the fabrication I'm looking at. I own or have access to all the tools I should need, and the space to do it. I'm working...

That should be it, if it's your stock transmission that is the right location. Want to be 100% sure, drop the drain pan and look. If that's the TCC control, the wiring inside the pan should run from there to a point about an inch from where your trans filter goes into your case. That is...

I don't think you would have to have the front of a Typhoon to do it, any 4x4 S/T front clip would work as long as you lock out the front axle. The 4x4 axles are stronger anyway. Road racer would be the way I would go if I did it. Start with the frame job. locked out 4x4 7.25" out front, Dana...

A few years back acouple of guys in Poland built an AWD stingray that got turbocharged and used in drag racing. The thing was very fast. I've found links to it in the corvette forum, and the SY/TY forum and noticed something.... nobody else has done it. Is this right, was it a one-of-a-kind...

Hey everyone:bounce: I'm a long-time car-crafter that fixes turbine engines in the ARMY for a living. I have had the pleasure of owning a mildly modified '80 stingray in the past, and had to sell it when I was fixing my finances 4 years ago. My money woes are over, and I'm looking to start...