Recent content by Pacha

Can anyone confirm me if the body mount bolt size is 7/16-14? Thanks.

Finally!!! after 4 years I´ve started to put it back together. :trumpet: Here are the Rod and bracket I made to replace the factory J. Now it is easier to regulate. The “standard” method in paint removal, Window scraper and heat gun. It takes a long time to remove the 3 coats of paint...

I'll use 8mm plate and mill de botton mounting tab till it is square to the rotor. TT can you upload the SW bracket file? I'll modify it for 12,19" rotors and upload the result. Thanks Pacha

We are also using SW2009. The FSL has a 3.5" mount. The difference is 0,35mm so a minor adjusment should solve it. I have not decided yet whether to use 1/4" or 8mm steel plate for the brackets. Is 1/4" thick enough?

Thanks!! That's the diagram I was looking for :drink:

I am sorry, yes they are the front ones.

The one here in the download area, I think it's yours....

I will be replacing the stock calipers with Wilwoods FSL. I found the bracket cad file on the download section but, since I will also use 12,19" rotors I need to modify the cad file. It would be easy to do if the spindle center were a data point in the file, but since it isn't there...... How...

Ok my idea won´t work. The powerlite caliper with integral parking brake comes with 1.00" pistons only (too small for c3).:cry: But I kept searching and found this http://www.hispecbrake.co.uk/calipers/sva_spot.htm Fixed mount, not floating. Available for 1,25" disk and at a good price. I...

Same here, That´s why I need a working parking brake, and since I will be using wilwood rotor The drum brake is not usefull any longer.

The site said so but I know the USA wilwood site by heart, and I've never seen that caliper. I am lookinf for the "perfect" parking brake solution and this may be it. I didn't know there was a Europe Wilwood site. Do you know how much is it?

Take a look at this: http://k80rum.co.uk/Mechanical_Handbrake.aspx Neat idea!!

yesterday I measured the BS on the sparewheel (original) of a friend's vette and It measured 4.00" I know that BS should be measured from outer edge, but in some places I have seen it measured from the flat part before the outer edge. Regards, Pacha

Yes I've seen it too, it seems that there are two ways to measure BS. I'll buy the 4,5"BS and use a spacer if needed Thanks

I'll decide in favour of 4"BS then. Thanks