Recent content by guru

  1. G

    Fia headlight covers

    Now that i have the buckets in, I have to figure out how to mount these things. Moroso makes some neat quick release retainers. Not to sure how I could make them work in the front though. I dont think the hinge will work because of the shape of the 73 front. Wingnuts would be easy but...
  2. G

    Jsup and injectors

    Well the flow advertised on the box is typically free flow, but flow declines from there. So you could be flowing like 30 GPH at 40 psi. Just something i have picked up.
  3. G

    Jsup and injectors

    55gph at what pressure?
  4. G

    slowly but surely

    The last one is to keep the missus off my sack
  5. G

    OIL weights, and.....

    I have been pondering draining the oil in my muncie and giving it some royal purple. They also make a gear oil for the rear end. I have also heard that the brass in the muncie hates synthetics.
  6. G

    Intake manifold modifications

    Anybody ever get involved with some serious modifications of their intake manifold. Like say putting some JB weld inside the intake and grinding it to shape because the ports down line up and fit your gasket perfectly? I have heard about people doing this, with say epoxy, but that seems kind...
  7. G

    FIA Headlights

    Anybody got a close up pic of these, so I can figure out how to assemble these things?
  8. G

    Crane Cams going under

    http://forums.corvetteforum.com/c3-tech-performance/2260600-crane-cams-goes-out-of-business.html#post1569078574
  9. G

    Dial Calipers

    Browne and Sharp or Starrett
  10. G

    A tale of 2 327s

    Hey guys, I have been pouring over the dyno mania article on the 2007 engine masters challenge and I have come up with the following tale of 2 327s. 1 is a ported stock casting head with a mild solid cam, and the other is an AFR headed 327 with a larger solid cam. I dont really care about the...
  11. G

    Rocker arms

    What you you guys do if you needed(wanted) a 1.8 intake rocker ratio and a 1.75 exhaust rocker ratio on a small block?
  12. G

    2007 Engine Masters - thoughts and analysis

    So looking over the entrants to the 2007 engine masters, these guys are getting ridiculous power out of a 300-500ci motor, with a stock displacement, stock dimension components, readily available aftermarket parts, a flat tappet camshaft, and a limit of 10.5:1 compression. All motors ran on 91...
  13. G

    Sportsman 2 heads

    So whats the deal with these? They SAY that they have been continuously developed for the past 20 years, but for some reason I am not buying it.
  14. G

    Can I make this tranny work?

    Hmmm Outside my range. Good luck.
  15. G

    Can I make this tranny work?

    What gear ratios does it have, and how much?
See more
Back
Top