Search results for query: *

Looking to swap a tremec 5 speed in my 78 with LS engine. Currently have 2004R. Don't have a z bar so thought about hydraulic clutch setup. Pro's and cons over the z bar?

Trying to add cruise as I finish up my conversion. Need to do on the cheap os I been searching around the LS forum and looks like I can use a cruise module from a late 90's S10. My 78 came with a cruise stalk. Is it possible or practical to use this stalk instead of changing out for the only...

Anyone ever filed a claim with Classic Collectors Insurance underwritten by Infinity Insurance Company. Same coverage as Hagarty and 1/4 of price. Insuring a 78 custom restro mod for 25K. Or for that matter are you insured with them.

Recently installed a two post lift to make future mods easier. Last summer I had Flowmaster Delta 40's installed and they are to loud for my liking but I am going to stay with them for a while as they cost me around $450 to get installed. Been thinking about the exhaust and how it has a drone...

I think the Buick gran nationals use a 12v electric brake booster. Any one swap one of these in your C3? I have an LS engine that don't want to use any vacuum if I can figure out a swap. I already have the electric headlight conversion.

Sold Like it says. Tru Flex front bumper cover will. Trial fitted and has had slots added to add in fitting. Purchased new from Toledo. Change of direction and going with real fiberglass. I have several other pics if needed. Can ship for $45 fed ex ground.

http://stlouis.craigslist.org/cto/4105277819.html

Getting prepared for this winters project of stripping 3 coats of paint. I have never painted before but share space with guy who owned a body shop for 15 years and has experience with kit car fiberglass. I have also talked with a local body shop who will work with shooting primer and final...

With my LS engine out for repair, now is the time to address my tranny. I have a 2004 R Heavy Duty with stock 78 rear end 3:08. Currently have the stock 255/60/15 tires, but planning on 17's in the future. Transmission never seems to really engage in first. I have adjusted the TV cable to...

Getting ready to wire the truck alternator for my swap. Adding the resistor and running a new 10 gauge wire to the starter. Is 10 gauge heavy enough or should I go 8. Alternator is a out of a 5.3 truck. I also need a disconnect of some kind to remove power quickly. I currently have a blade...

I am looking for the other side of this plug. Holley wants $65 for a harness for the I/O and I am only using 2 outputs for the fans. Any idea's of how to cross reference...

Anybody try this product yet. https://www.dipyourcar.com/home.php http://www.wikihow.com/Plasti-Dip-Your-Car-and-Car-Accessories

Putting the steering wheel back on and thought I would see if the horn would work as it didn't before I took the interior apart. Followed the assembly diagram. Tested just using the 3 point standoff and spacers and horn would work when I pushed on the sides of the ring. It felt like I was...

I have 2 10" electric fans. Didn't get any kind of wiring schematic or wiring hardware. I am using the Holley EFI to control them but will still need to power them and the Holley will provide the signal for when to turn on and off. What kind of kit should I get? They didn't come with any...

How do I test to see if this switch will work? It the switch with the pink and red wire. Getting ready to wire the lock out. I have a cruise control brake switch already in place. Will it work to turn the lockout off? I think I want it normally open and then closed when brake applied?

Can filter regulator be mounted vertical Only have seen them mounted horizontal but does it matter?

Going with fuel pump in the tank and using the holley accessory brackets. 1998-2002 F-Body LS1 Fuel Pump assembly Corvette 97 and up- power steering pump, pulley and reservoir. Alternator and starter from Truck 04 Silverado 5.3 Idler pulley and tensioner from Corvette 97 and up

I need to use power steering pump and reservoir for my LS swap from a 99 Corvette to fit the holley bracket. Also using a Jeep Box from a 99 Cherokee. Will this pump have to much pressure for the jeep box?

Looking to rent or buy a lift plate?

I can send additonal pictures open to offers. Stan's Tri Headers, purchased new 2 years ago and had them ceramic coated. Their coating didn't hold up so well. New I paid over $700 sell for $350 Some surface rust on before the collectors. Chrome Oil Pan $30 Chrome Valve Covers with hardware...