Go Back   VetteMOD.com > VetteMOD Technical Discussion > Engine

Reply
 
Thread Tools
  #1  
Old 06-23-2017, 09:22 PM
BBShark's Avatar
BBShark BBShark is offline
United States | Garage Monkey
 
Join Date: Mar 2008
Location: Right here
Posts: 4,298
My Photos: (253)
Default Custom Length Spark Plug Wire Kits?

Never done this.

Is there a good custom length spark plug wire kit out there or ?
__________________
Reply With Quote
  #2  
Old 06-24-2017, 03:03 PM
mrvette's Avatar
mrvette mrvette is offline
United States | Phantom of the Opera
 
Join Date: Mar 2008
Location: NE Florida
Posts: 15,287
My Photos: (3)
Default

Two ways to go on that, buy stock lengths, for like my 350 engine, supposed to run down lo, and I have headers, so up/over, shorten as needed 8mm wires, Jacobs ceramic boots....HEI......

OR just buy a length of wire, and clips/boots and DIY......I have done both ways, and the last go round, I just modified some 'stock' wires and used the Jacobs ceramic boots.....
__________________
"Hell, there are no rules here ... we're trying to accomplish something." Thomas Edison
I have a little list, let ALL of them be MIST......
Reply With Quote
  #3  
Old 06-24-2017, 03:35 PM
redvetracr's Avatar
redvetracr redvetracr is offline
United States | Addict
 
Join Date: Mar 2008
Location: midwestern USA
Posts: 1,540
My Photos: (126)
Default

I have Taylor wires, plug boot comes assembled, dist cap end you cut and assemble yourself.
__________________
Reply With Quote
  #4  
Old 06-24-2017, 09:57 PM
BBShark's Avatar
BBShark BBShark is offline
United States | Garage Monkey
 
Join Date: Mar 2008
Location: Right here
Posts: 4,298
My Photos: (253)
Default

Do you need a special crimp tool to assemble?
Reply With Quote
  #5  
Old 06-24-2017, 10:39 PM
redvetracr's Avatar
redvetracr redvetracr is offline
United States | Addict
 
Join Date: Mar 2008
Location: midwestern USA
Posts: 1,540
My Photos: (126)
Default

yes, I use a stamdard Belden crimper from NAPA
Reply With Quote
  #6  
Old 07-22-2017, 12:51 AM
Kid Vette's Avatar
Kid Vette Kid Vette is offline
United States | Master-Baiter
 
Join Date: Mar 2008
Location: Santa Cruz, CA
Posts: 1,110
My Photos: (314)
Default

[Only registered and activated users can see links. Click Here To Register...] comes with a crimping tool.
__________________
“Adding power makes you faster on the straights. Subtracting weight makes you faster everywhere.” Colin Chapman
Reply With Quote
  #7  
Old 06-27-2018, 10:42 PM
BBShark's Avatar
BBShark BBShark is offline
United States | Garage Monkey
 
Join Date: Mar 2008
Location: Right here
Posts: 4,298
My Photos: (253)
Default

So I ended up buying an Accel custom length kit. Was thinking about running the wires under the headers but there is not much space there so it looks like clipped onto the valve cover bolts is my easiest/best option.
Reply With Quote
  #8  
Old 06-30-2018, 02:54 AM
bobs77vet's Avatar
bobs77vet bobs77vet is offline
United States | Addict
 
Join Date: Mar 2008
Location: arlington va
Posts: 1,704
My Photos: (2)
Default

that's what I did...it was very effective



Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:31 PM.
 


Design by: vBulletin Skins Zone
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.