No turning back now

For what I can see, you will have to use a builder primer in those areas where a lot of paint was taken off, You have a mountain to climb, If you have a painter friend, have him look it over before you start priming, that way you won't be going backwards on filling different areas to get it all flat, There are different grades of filler primer and dryers, I'm sure you know this? I'd say you have just scratched it so far,, Happy arms are to come. Hve fun.

I have some sealer and builder primer to put on there. Happy arms :banghead: my arms are not so happy so i decided to take the day off from sanding :zzz: take a little break,i have to spread all this fun out i don't want it to end to soon you know :nuts:

Here is a question about the sealer.
should i apply it before putting on any putty to give it a base to bond too.
Or should i use the sealer after the putty is applied and sanded.
 
Shoot the epoxy primer/sealer over the SMC then use body filler and urethane high build primer.
Dunno how much you're willing to spend: PPG DP epoxy is awesome stuff but at $70/qt it's pricey - a gallon is probably around $220 or so..... I have used Kustomshop epoxy from TCP global and that seems to be pretty good too, half the price, $120 shipped.....

You can then spray sealer (reduced epoxy primer) between the high build primer and base coat - after you spray the sealer you only have a few days to shoot the base, otherwise you have to sand and spray another coat sealer.
 
Shoot the epoxy primer/sealer over the SMC then use body filler and urethane high build primer.
Dunno how much you're willing to spend: PPG DP epoxy is awesome stuff but at $70/qt it's pricey - a gallon is probably around $220 or so..... I have used Kustomshop epoxy from TCP global and that seems to be pretty good too, half the price, $120 shipped.....

You can then spray sealer (reduced epoxy primer) between the high build primer and base coat - after you spray the sealer you only have a few days to shoot the base, otherwise you have to sand and spray another coat sealer.

Thank you for the explanation some articles i have been reading were about as clear as the big Mo river.
I have PPG JP377 epoxy promer/sealer And PPG JP202 2K primer. Do those sound ok :eek:h:
 
I have PPG JP377 epoxy promer/sealer And PPG JP202 2K primer. Do those sound ok :eek:h:

PPG JP202 is the "shopline" urethane high build primer - I used it on the '79 and on the Ghia. I like it better than the Kustomshop which seems to be thinner and does not build up as well. The shopline primer is easy to sand.

I have not used their JP375 epoxy but the JP385 which is a sealer that's designed to seal the primer before the base coat is applied.

https://buyat.ppg.com/refinishProdu...roductID=197b699d-54fd-47c5-af9f-1d6f9e9e3932

Here's the shopline info-website (the search function is on bottom left).

https://buyat.ppg.com/refinishProdu...?BrandID=fc333455-bac7-410a-a3fd-04b4ea233dc0
 
Get a piece of plastic strap that they use when banding a box. Slide it under there with a back & fourth motion. It will take it right off. That is what they use at the body shops.

They DO!!!??? :lol:

Good Tip.........I actually never thought of that but will definitely give it a try. :thumbs:
 
Get a piece of plastic strap that they use when banding a box. Slide it under there with a back & fourth motion. It will take it right off. That is what they use at the body shops.

They DO!!!??? :lol:

Good Tip.........I actually never thought of that but will definitely give it a try. :thumbs:

See there:eek: Coming around VetteMod can be a learning experience. :yahoo:
 
moving right along,i think this area is the part i hate the most so far,and what a friggn mess in the hinge area :huh:
thum_38490f84f8115e8.jpg
thum_38490f84f964640.jpg
thum_38490f84fac1287.jpg
 
Your camera takes photos of the future ???
:D:lol:


looking good so far
:thumbs:

I know,you should see what happens when i take a pic of a Power ball ticket the day before the drawing :lol:

Sorry. Rich explained your casino habbits. I'm not buyin.:pprrtt:

Whats wrong with eye balling the cocktail girls all night :huh2: Rich shoved money into the machines I watched the girls :D
 
The drivers jamb is sealed and the passenger side is apart and sanded down,had to apply a little filler on the pass side some of the old filler was cracked and loose.
thum_3849121ae53f5c6.jpg
thum_3849121ae7aacb5.jpg
thum_3849121ae97ed83.jpg


Why are my pics coming out so small. i have them sized to 1280x960
 
Last edited:
made some more progress today,the jambs are primed with 2k primer/filler,and if there are no problems to be fixed i will spray the base/clear coat tomorrow :banghead:
38491a2ada2418d.jpg
38491a2adb7e6fa.jpg
38491a2adcd1734.jpg
 
Ahhhhhhh...more progress:thumbs:

I have spent 2 weeks on these jambs :smash: they better look good when i get done :thumbs:

When i get the jambs all done i still can't hang the doors,purchased all the parts to rebuild the hinges while i was there,and dang it if the springs are not on back order :suicide:
 
Ahhhhhhh...more progress:thumbs:

I have spent 2 weeks on these jambs :smash: they better look good when i get done :thumbs:

When i get the jambs all done i still can't hang the doors,purchased all the parts to rebuild the hinges while i was there,and dang it if the springs are not on back order :suicide:

No doubt It'll look great.

Yea, it just sucks when things are on BO and your trying to get a job done!
 
Top